Gantt Chart



TASK TITLE
6/25-6/297/2-7/67/9-7/137/16-7/207/23-7/26
MTWRFMTWRFMTWRFMTWRFMTWRF
Brainstorming
Dev. Conceptual Drawings and Models
CAD Design
Final Design
Finalize Conceptual Model
Develop BOM
Complete Low Cost Prototype
Complete Final Design & CAD
Complete BOM
Manufacturing Test
Order Parts
Test Design Manufacturing
Test component fits
Revise design as needed
Production
Fabricate Small Scale Vehicle Shell
Install Components
Test Parts
Documentation
Final Report
Complete Feedback Survey
Deadlines
Presentation #1
Final Presentation
Final Report

Comments

Post a Comment

Popular posts from this blog

Production Week

Image
This week, we are completing manufacturing the cabin. Monday: We looked at the STL files for our cabin parts to see if anything needs to be changed or modified. The other teams are starting to 3D print their parts, so Victor and Arushi watched to make sure the pieces come out well. The Prusa printer was making it hard for us to remove the pieces once they were done because we applied glue on the printing bed to allow the filament to stick to the bed. It took us a while to remove the pieces because they were stuck to the printing bed. We decided it would be better if we did not apply any glue, but maybe if we could look into a flexible bed that the pieces can be peeled off of. We also got acrylic sheets and super glue for the windows on the cabin. We realized we couldn't cut the acrylic with a box cutter or the tools we had in the shop. Tuesday:  We cut the acrylic sheets with the dremel tool that Daniel got from home. We also started printing out our showcase model of the cabi
Read more

Final Design Week

This week, we only worked for three days since 4th of July was a day off. Monday: Arushi finished drawing our conceptual design, and finalizing it. We also created a spreadsheet for our bill of materials and inventory. We decided to begin printing out our model, so we started with the bottom piece, which takes about 4 hours to print. The printer had issues in terms of the filament not being able to stick to the base of the 3D printer, and so we planned to re-print the next day. Tuesday:  Victor worked on fixing the Prusa 3D printer and TAZ printer, reset the printer's settings twice, while Daniel and Arushi began preparing the presentation for next week, and Ben worked on figuring out how to program the Arduino. Thursday:  We revised the presentation that we will be presenting next week. We were also able to get both 3D printers to work so our production is going to be doubled. Today we printed out the top piece and the side piece. When we first printed out the side piece, t
Read more